Power Management - Bosch XDK110 General Information Manual

! !

2.2 Power Management

For the easy application in portable applications, the XDK is equipped with a 560mAh Li-Ion
rechargeable battery. While connected to a power source via the Micro USB connector, the battery
will automatically be charged. Charging is indicated by the green LED. The device can be charged
independent of the position of the power switch. The maximum charging current depends on the
charger used.
Table 4: Charger Type and Current
Standard downstream port (SDP):
Typical form found in desktop and laptop computers
Charging downstream port (CDP):
Higher current USB port for PCs, laptops, and other
hardware (indicated by a lightning symbol)
Dedicated charging port (DCP):
Power sources like wall warts and auto adapters; charging
can occur with no digital communication at all.
Additional details on these port types are described in the USB Battery Charging Specification, Rev
1.1, 4/15/
XDK110
© Bosch Connected Devices and Solutions GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as
copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
General Information Guide XDK110 General Information Guide XDK110
Charger Type Maximum Current
100 mA
500 mA
500 mA or 100 mA depending on
charger
Page ! 1 0 Page ! 1 0
BCDS