Consumable Parts - Canon imageRUNNER ADVANCE 8205 Service Manual

N. Consumable Parts
Consumable parts are defined as those parts having a limited life that will be
reached during a customer's specific machine operation, and should then be
replaced as needed. Examples of consumable parts include, but are not
limited to, feed rollers and cleaner blades.
An estimated consumable parts list is provided in the table below to assist in
the initial parts/supplies planning. A consumable part's life expectancy is
directly related to usage factors, such as paper size, paper quality,
environment, usage application, and machine maintenance. Therefore,
consumable parts do not have a warranty, and Canon USA cannot guarantee
a minimum life.
Note: All consumable parts shown in the table below are for reference
purposes only, and are subject to change without notice.
Table 21 – Main Unit Consumable Parts List
Description
Primary Charging
Assembly
Pre-Transfer Charging
Assembly
Developing Assembly
Drum Cleaning Blade
Drum Separation Claw
Drum Front Side Seal
Drum Rear Side Seal
8 Part numbers are subject to change without notice.
56 Value is based on LTR paper. Estimated average values in the field are based on data from the supplier. Data
is subject to change, depending on many factors, including, without limitation, the monthly copy volume,
environment, type of image printed, and how the customer handles the equipment.
imageRUNNER ADVANCE 8200 Series Service Guide
imageRUNNER ADVANCE 8200 Series Service Guide
8
Part Number Quantity
FM3-7288-000 1
FM4-3149-000 1
FM4-5429-000 1
FL3-6291-000 1
FB4-8018-000 3
FC8-7086-000 1
FC8-7086-000 1
56
Estimated Life
1,500,000 pages
1,500,000 pages
500,000 pages if the
machine is in a
1,500,000 pages high-temperature and
high-humidity environment
(86°F (30°C) and 80% RH)
Reverse the blade after
600,000 pages 300,000 (single-sided) sheets
have been output.
250,000 pages if the
machine is in a
500,000 pages high-temperature and
high-humidity environment
(86°F (30°C) and 80% RH)
250,000 pages if the
machine is in a
500,000 pages high-temperature and
high-humidity environment
(86°F (30°C) and 80% RH)
250,000 pages if the
machine is in a
500,000 pages high-temperature and
high-humidity environment
(86°F (30°C) and 80% RH)
Remarks
November 2012
Page 67