Searching for a photo – Photo search/Photo scan (DCR-TRV19 only)
(4) Select OFF, then press EXEC.
(5) Press SEARCH MODE on the Remote Commander repeatedly, until the
(6) Press . or > on the Remote Commander to select the photo for playback.
To stop searching
Press x on the Remote Commander or
Scanning photo
The POWER switch should be set to
(1) Press SEARCH MODE on the Remote Commander repeatedly, until the
(2) Press . or > on the Remote Commander.
1
SEARCH
MODE
To stop scanning
Press x on the Remote Commander or
If a tape has a blank section between recorded sections
PHOTO SEARCH and PHOTO SCAN may not work correctly.
The available number of photos that can be searched using the cassette memory
The available number is up to 12 photos. However, you can search 13 photos or more
using the photo scan function.
80
PHOTO SEARCH indicator appears.
The indicator changes as follows:
tDATE SEARCH
(no indicator) T
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
PHOTO SCAN indicator appears.
The indicator changes as follows:
tTITLE SEARCH* t DATE SEARCH t PHOTO SEARCH
(no indicator) T
* TITLE SEARCH appears only when CM SEARCH is set to ON in the menu
settings.
Each photo is played back for about 5 seconds automatically.
tPHOTO SEARCH
PHOTO SCAN T
on your camcorder.
.
PHOTO SCAN T
2
on your camcorder.
PHOTO 00
SCAN