Sony Handycam DCR-VX2100E Operating Instructions Manual page 96

Searching for a recording by
index – Index search
To stop searching
Press x.
In the
•The bar in the
present point on the tape.
•The mark in the
actual point you are trying to search for.
If a tape has a blank portion between
recorded portions
The index search function may not work
correctly.
If you mark an index onto an external input
signal
"LINE" appears in the CH column.
The index of the recording start point when
recorded from external audio equipment
The index mark is not recorded in cassette
memory when recorded from external audio
equipment. If you want to search for the index
point, set CM SEARCH to OFF in the menu
settings and search for the index point without
cassette memory.
Searching for the index point
without using cassette
memory
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
settings (p. 156). If using a tape without
cassette memory, skip this step.
(3) Press SEARCH MODE on the Remote
Commander repeatedly, until the index
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t DATE SEARCH t
PHOTO SEARCH t PHOTO SCAN t no
indicator
(4) Press . on the Remote Commander to
search for the previous index point or press
> on the Remote Commander to search
for the next index point. Your camcorder
automatically starts playback at the selected
index point. Each time you press . or
>, your camcorder searches for the
previous or next index point.
To stop searching
Press x.
96
mark
mark indicates the
indicates the
to OFF in the menu
x
(1)
(2)
(3)
(4)
.
. >
x
t t
t t
>