Table of Contents
Advertisement
06.91
The following data is entered into the processing buffer:
Function number:
Receiver location:
Log. partner destination:
Identifiers 7-10:
File transfer
The "file transfer" function is executed in the COM area by a standard routine. Loading,
retransmitting and clearing of NC files is possible in this way.
The file transfer can be initiated by the partner node (e.g. production control computer) or by
the CNC.
In order to achieve unambiguity, the system mode determines which node is authorized to
initiate:
•
In the normal mode only the partner node (e.g. production control computer) can initiate
the file transfer.
•
In the special/maintenance mode only the operator at the machine can inititate the transfer
Only SINUMERIK 880).
© Siemens AG 1989 All Rights Reserved
SINUMERIK 840/880 (PJ)
Value
13
"Sender location" from the initiation message frame
"Log. partner sender" from the initiation message frame
Id. 7 8 9 10
- - 0
0
6FC5 197-0AB20-0BP0
4 COM
4.2.1 Standard routines
4–3
Advertisement
Table of Contents
