Mitsubishi Electric 800 Series Instruction Manual page 14

NOTE
• When using stranded wires without crimp terminal, twist enough to avoid short circuit with a nearby terminals or wires.
• Pulling out the wire forcefully without pushing the open/close button all the way down may damage the terminal block.
• Use a small flathead screwdriver (tip thickness: 0.4 mm/tip width: 2.5 mm). If a flathead screwdriver with a narrow tip
is used, terminal block may be damaged.
Commercially available products (as of February 2012. The product may be changed without notice.)
Product
Model
name
SZF 0- 0,4  2,5
Screwdriver
• Place the flathead screwdriver vertical to the open/close button. In case the blade tip slips, it may cause an inverter
damage or injury.
• When wiring cables to the inverter's RS-485 terminals while a plug-in option is mounted, take caution not to let the
cables touch the circuit board of the option or of the inverter. Otherwise, electromagnetic noises may cause
malfunctions.
14
INSTALLATION AND WIRING
Manufacturer
Phoenix Contact Co., Ltd.