Installation - GE CRxVision Operating Manual

Installation

Caution: When installing the CRxVision, care must be taken to ensure that
there is either a mains plug or an all-cable disconnecting device in the internal
installation fitted near the CRxVision and that it is easily accessible.
Caution: If the CRxVision is installed inside of an X-ray room it must be
protected from stray radiation by proper shielding.
Caution: In case of unstable power conditions it is advised using an
uninterruptible power supply.
Warning: The CRxVision is a tabletop digitizer. The structure and stability of
the table used, need to be suitable in relation with the size and weight of the
system. The table should not be subject to excessive shock and vibrations
from other sources, as this may influence the image quality.
Warning: Reduced image quality possible due to ambient light. Operate the
CRxVision in a dark room.
Warning: The CRxVision is heavy (45 kg). Risk of injuries when lifting the
CRxVision.



CRxVision Operating Manual V1.2
Use proper foot and hand protection when lifting the CRxVision.
Two persons are required to lift and carry the CRxVision.
Observe local regulations for lifting and carrying of loads.
17