Sony HANDYCAM DCR-SR40 Handbook page 18

5
Set the camcorder onto the
Handycam Station securely.
Be sure to set the camcorder to the end.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged.
• When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
18
To charge the battery pack using only
the AC Adaptor
Slide the POWER switch up to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
POWER
switch
DC IN jack
DC plug
Open the
jack cover
Power cord
To the wall outlet
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
BATT (battery)
release lever
• When you remove the battery pack, make sure
that none of the respective lamps of the POWER
switch (p.21) is on.
CHG lamp
Battery
pack
AC Adaptor