Flash Level; File No; Redeye Reduc; Still Media - Sony Handycam HDR-SR1 Operating Manual

QUALITY
B FINE ( )
Records still images at the fine image
quality level.
STANDARD ( )
Records still images at the standard image
quality level.

FILE NO.

B SERIES
Assigns file numbers in sequence. If an
image is deleted, its file number is skipped.
RESET
Assigns file numbers in sequence,
following the largest file number existing
on the current recording medium.
AE SHIFT
See page 70.
WB SHIFT (White
Balance Shift)
See page 71.
NS LIGHT (NightShot
Light)
See page 71.
EXP.FOCUS
See page 72.
GUIDEFRAME
See page 72.
ZEBRA
See page 72.

FLASH LEVEL

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
HIGH( )
Makes the flash level higher.
B NORMAL( )
LOW( )
Makes the flash level lower.

REDEYE REDUC

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
You can prevent redeye by activating the
flash before recording.
Set [REDEYE REDUC] to [ON], then press
(flash) (p. 40) repeatedly to select a
setting.
(Auto redeye reduction): Pre-flashes to
reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r
(Forced redeye reduction): Always
uses the flash and the redeye reducing pre-
flash.
r
(No flash): Records without flash.
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
RING SETTING
See page 72.

STILL MEDIA

See page 39.
75
Continued ,