Climate Range; Ventilation; Fitting Wall Spacers Supplied - Miele KWT 6834 SGS Operating And Installation Instructions

Installation

Climate range

The wine conditioning unit is designed
for use within a certain climate range
(ambient temperatures) and should not
be used outside this range. The climate
range of the wine conditioning unit is
stated on the data plate inside it.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the wine conditioning unit to
rise which could lead to damage.
IMPORTANT
In environments with high humidity
condensation may appear on the ex-
ternal surfaces of the wine condition-
ing unit.
This can lead to corrosion of the ap-
pliance walls.
For prevention, it is advisable to in-
stall the wine conditioning unit with
sufficient ventilation in a dry and/or
air conditioned room.
Make sure that the appliance door
closes properly, the specified ventila-
tion gaps are adhered to and the
wine conditioning unit is installed in
accordance with these installation in-
structions.
58
Ambient room
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C

Ventilation

The wine conditioning unit can be
placed directly against a wall. Please
note that to ensure sufficient ventilation,
the ventilation gaps must not be
covered or blocked in any way.
They should be dusted on a regular
basis.

Fitting wall spacers supplied

The wall spacers supplied must be
used in order to achieve declared en-
ergy consumption values and to pre-
vent the build-up of condensation at
high ambient temperatures. Appliance
depth is increased by approx. 35 mm
with the wall spacers fitted. If the wall
spacers are not used the functionality
of the wine conditioning is not af-
fected. Energy consumption is only
slightly increased with less distance
between the wine conditioning and the
wall.
 Fit the wall spacers onto the back of
the wine conditioning on the top left
and right.