Dividing Clips (Hd Mode Only) - Sony HANDYCAM PMW-350K Operating Instructions Manual

Dividing Clips (HD Mode Only)

In the expand thumbnail screen (see page 88) and
the shot mark thumbnail screen (see page 89) ,
HD-mode clips can be divided into two clips at
the selected frame.
1
Select the thumbnail of the frame where
you want to divide the clip, and then
select THUMBNAIL >Divide Clip.
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select [Execute], and press the MENU
knob.
The clip is divided at the selected frame, and
two clips with different names are created.
The first four characters of the clip name are
taken from the name of the original clips, and the
last four characters are new serial numbers.
Example: When the name of a newly recorded
clip would be EFGH0100, and a clip named
ABCD0002 is divided, the names of the two
newly created clips are ABCD0100 and
ABCD0101.
Note
When there is not enough remaining capacity on the S×S
memory cards to store the divided clips, a message
appears to inform you that there is not enough capacity.
Thumbnail Operations 91