Advertisement
Keep tools and other items away from the compressor when it is in use, and keep area clean and clear of unnecessary items.
Ensure any air hose attached is not tangled, twisted or pinched.
Keep children and unauthorised persons away from the working area.
DO NOT dismantle the compressor for any reason. The unit must be checked by qualified personnel only.
DO NOT use the compressor outdoors, or in damp, or wet, locations and DO NOT operate within the vicinity of flammable liquids,
gases or solids.
DO NOT touch compressor cylinder, cylinder head or pipe from head to tank as these may be hot and will remain so for some time
after shutdown.
DO NOT attempt to move the compressor by pulling the air tool hose. Only move the compressor by the handle.
DO NOT use this product to perform a task for which it is not designed.
DO NOT deface the certification plate attached to the compressor tank.
DO NOT cover the compressor or restrict air flow around the machine whilst operating.
DO NOT operate the compressor without an air filter.
DO NOT allow anyone to operate the compressor unless they have received full instructions.
DANGER! DO NOT direct the output jet of air towards people or animals.
WARNING! The air tank is a pressure vessel and the following safety measures apply:
DO NOT tamper with the safety valve and DO NOT modify or alter the tank in any way and DO NOT strap anything to
the tank.
DO NOT subject the tank to impact, vibration or to heat and DO NOT allow contact with abrasives or corrosives.
Drain condensation from tank daily and inspect inside walls for corrosion every three months and have a detailed tank
inspection carried out annually.
The tank shell must not fall below the certified thickness at any point.
Inspection of pressure tank both internal and external.
Under the PRESSURE SYSTEMS SAFETY REGULATIONS 2000 it is the responsibility of the owner of the compressor to initiate a system
of inspection that both defines the frequency of the inspection and appoints a person who has specific responsibility for carrying out the
inspection.
DO NOT carry out any welding operations on any pressurised parts of the vessel.
WARNING! If an electrical fuse blows, ensure it is replaced with an identical fuse type and rating.
When not in use, store the compressor carefully in a safe, dry, childproof location.
When the compressor is not in use, it should be switched off, disconnected from the mains supply and the air drained from the tank.
2. INTRODUCTION
V-Twin pump with aluminium cylinder heads and cast iron liners for reduced weight and improved resistance to wear. Suitable for general purpose
workshop applications. Pump directly coupled to heavy-duty induction motor for reliable operation. Precision welded receiver tank manufactured to
meet Pressure Vessel Directive. Fitted with fully automatic pressure cut-out switch, air regulator and pressure gauges for tank and supply.
Supplied with handle and wheels for easy manoeuvrability. Fitted with ASTA/BS approved non-rewirable plug.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . .SAC05030.V2 . . . . . . . . . . . . . . . . SAC10030.V2
Motor Output: . . . . . . . . . . . . . . . . . . . . . . . . .3.0hp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0hp
Voltage/Phase: . . . . . . . . . . . . . . . . . . . . . . . .230V - 1ph . . . . . . . . . . . . . . . . . . . . . . 230V - 1ph
Rated Supply: . . . . . . . . . . . . . . . . . . . . . . . .13A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13A
Max. Air Displacement: . . . . . . . . . . . . . . . . .12.6cfm . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6cfm
Max. Free Air Delivery: . . . . . . . . . . . . . . . . .8.75cfm . . . . . . . . . . . . . . . . . . . . . . . . . . 8.75cfm
Tank Capacity: . . . . . . . . . . . . . . . . . . . . . . . .50ltr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100ltr
Max. Pressure:. . . . . . . . . . . . . . . . . . . . . . . .130psi/9bar . . . . . . . . . . . . . . . . . . . . 130psi/9bar
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51kg
Noise Power: . . . . . . . . . . . . . . . . . . . . . . . . .97dB(A) . . . . . . . . . . . . . . . . . . . . . . . . . . 97dB(A)
Noise Pressure: . . . . . . . . . . . . . . . . . . . . . . .72.1dB(A) . . . . . . . . . . . . . . . . . . . . . . . .72.1dB(A)
SAC10030.V2
© Jack Sealey Limited
SAC05030.V2
fig.1
Original Language Version
fig.2
SAC05030.V2, SAC10030.V2 Issue: 2 (L) -15/08/18
Advertisement
