Ethernet Standards - Lenovo RackSwitch G8264 Product Manual

Stacking:
Up to eight switches in a stack; single IP management
802.1Qbg support
vNIC or UFP support
Support for UFP with 802.1Qbg
Manageability:
Industry-standard command line interface (isCLI)
Simple Network Management Protocol (SNMP V1 and V3)
Telnet interface for CLI
Secure Shell (SSH) v1 and v2 for CLI
Secure Copy (SCP) for uploading and downloading the switch configuration via secure
channels
Service Location Protocol (SLP)
Link Layer Discovery Protocol (LLDP) for discovering network devices
Serial interface for CLI
Scriptable CLI
Dual software images
Firmware image update via TFTP, FTP, Secure FTP (sFTP), or USB storage
Network Time Protocol (NTP) and Precision Time Protocol (PTP) for switch clock
synchronization
Netconf (XML)
Lenovo Switch Center management application (optional; sold separately)
Lenovo XClarity (optional; sold separately) for discovery, inventory, monitoring and events
Monitoring:
Switch LEDs for port status and switch status indication
Remote Monitoring (RMON) agent to collect statistics and proactively monitor switch
performance
Port mirroring for analyzing network traffic passing through switch
Change tracking and remote logging with syslog feature
Support for sFLOW agent for monitoring traffic in data networks (separate sFLOW analyzer
required elsewhere)
The following features are not supported with IPv6:
Bootstrap Protocol (BOOTP) and DHCP
RADIUS, TACACS+ and LDAP
Stacking
VMware Virtual Center (vCenter) for VMready
Routing Information Protocol (RIP)
Border Gateway Protocol (BGP)
Protocol Independent Multicast (PIM)
Virtual Router Redundancy Protocol (VRRP)
sFLOW
The following features are not supported with Stacking (for a full list of features, see the Networking OS
Application Guide):
FCoE
IGMP Relay, IGMP Querier, and IGMPv3
IPv6
Policy-based routing
Routing protocols (RIP, OSPF, BGP)
sFLOW
Virtual Router Redundancy Protocol (VRRP)

Ethernet standards

Lenovo RackSwitch G8264 13