Clearing Display Characters Automatically; Auto Clear; Panorama/Full Motion Mode; Changing The Translucence Ratio Of The Characters - Sony CDX-M3DI Operating Instructions Manual

01US02CD-U.fm
00US+00COV-U.book Page 21 Friday, December 13, 2002 4:08 AM
Clearing display characters
automatically
— Auto Clear (Spectrum analyzer/Panorama/
Full motion mode)
You can make display characters disappear for a
moment in Spectrum analyzer/Panorama/Full
motion mode. When set to ON, you can display
the display characters only when the disc, album,
or track is changed or the source or display mode
is changed. You can enjoy full images.
1
Play or receive the source (radio, CD,
MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"AutoClear."
Each time you press < or ,, the item
changes as follows:
AutoClear y BlendLevel y
Background y Color Sel y
SlideShow y AutoClear
4
Press (ENTER).
5
Press (ENTER).
6
Press M or m to select "ON."
To cancel the Auto Clear function, select
"OFF."
7
Press (ENTER).
8
Press (GRAPHIC).
The display returns to the normal display.
Note
In Standard/Clock mode, you cannot make the display
characters disappear automatically.
Changing the translucence
ratio of the characters
—Blend Level (Spectrum analyzer Panorama/
Full motion mode)
You can set the translucence ratio (color density)
of the characters in the Spectrum analyzer/

Panorama/Full motion mode.

By setting this level down, you can adjust the
characters in the display to appear opaque.
1
Playback or receive the source (radio,
CD, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"BlendLevel."
Each time you press < or ,, the item
changes as follows:
AutoClear y BlendLevel y
Background y Color Sel y
SlideShow y AutoClear
4
Press (ENTER).
5
Press (ENTER).
6
Press < or , to select the
permeation ratio (Level 0-15).
The lower the level, the paler the display
characters.
7
Press (ENTER).
8
Press (GRAPHIC).
The display returns to the normal display.
Notes
• In Standard/Clock mode, you cannot change the
translucence ratio of the display characters.
• If you set "Auto Clear" to "ON" (page 21) or
"Background" to "ON" (page 22), the translucence
ratio of the display characters does not change.
3-251-042-11 (1)
masterpage:Right
21
CDX-M3DI