Sony CDX-MP450X Primary User Manual (English, Español, Français) Operating Instructions Manual page 13

Playing the stored program
During playback, press (3) (PGM).
Program Play starts.
To return to normal play mode, select
"PGM -OFF."
Note
"NO DATA" appears in the display if no track is
stored in the program.
Erasing an entire program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
3
Press the (–) side of (FLDR/PRESET)
repeatedly until "ERASE-ALL" appears.
4
Press (ENTER) for 2 seconds.
The entire program is erased.
5
Press (MENU) twice.
Adding tracks to the program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
When adding a track to the end of a
program, skip step 3.
3
Press either side of (FLDR/PRESET)
repeatedly to select the program number
where you want to insert a new track.
4
Press (SEEK) to select the new track.
5
Press (ENTER).
The selected track is inserted at that
program number, and the succeeding
tracks are renumbered.
To continue inserting tracks, repeat steps 3
to 5.
6
Press (MENU) twice.
Note
Once all 20 slots have been filled, "**FULL**"
appears in the display, and you cannot insert more
tracks.
Erasing tracks in a program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
3
Press either side of (FLDR/PRESET)
repeatedly to select the program with
the track number you want to erase.
4
Press (ENTER) for 2 seconds.
The selected track is erased, and the
succeeding tracks are renumbered.
5
Press (MENU) twice.
Program No.
13