Sony NSR-1000 Series Release Notes
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVR
  5. NSR-1000 Series
  6. Release notes

Sony NSR-1000 Series Release Notes

Sony car video system user manual
Hide thumbs Also See for NSR-1000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
NSR-1000 Series
NSR-1200/NSR-1100/NSR-1050H
Version 1.1.1 Release Note 1
Edition
st
Last Modified Date: Dec. 18
, 2009
th
ⓒ 2009 Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony NSR-1000 Series

Summary of Contents for Sony NSR-1000 Series

  • Page 1 NSR-1000 Series NSR-1200/NSR-1100/NSR-1050H Version 1.1.1 Release Note 1 Edition Last Modified Date: Dec. 18 , 2009 ⓒ 2009 Sony Corporation...
  • Page 2 DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS DOCUMENT OR INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this document or the information contained herein at any time without notice. Trademarks Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries."...

  • Page 3: Table Of Contents

    １-１-２ Simple Motion Detection support...1 １-１-３ H.264 Codec support ...1 １-１-４ Expansion of supported languages...2 １-２ Built-in client software and software tools with NSR-1000 Series ...2 １-３ Information for support client software and software tools ...2 １-４ Support Camera Information...4 ２...
  • Page 4 ４-１-３ Main Window - Search and Play back...19 ４-１-４ Main Window – Monitoring ...20 ４-１-５ Analog Camera Control ...21 ４-１-６ Alarm Notification / Alarm History...22 ４-１-７ Search Window...22 ４-１-８ Device Configuration...22 ４-１-９ Server Configuration...25 ４-１-１０ Action Configuration ...25 ４-１-１１ Schedule Configuration ...25 ４-１-１２...

  • Page 5: １ Overview

    Sony camera servers as VMD (Camera). Camera server: SNT-EP104, SNT-EP154 １-１-３ H.264 Codec support Newly supports H.264 Codec for the Sony cameras. Please use the following firmware versions when you use H.264 Codec. Supported model name and firmware version are as follows: Camera Model Name...

  • Page 6: １-１-４ Expansion Of Supported Languages

    SNC-RX570 SNC-CS50 SNC-RZ50 SNC-DF50 SNC-DF80 SNC-DF85 １-１-４ Expansion of supported languages Newly supports Polish and Korean. １-２ Built-in client software and software tools with NSR-1000 Series NSR-1000 NSR Server Software Series Version Version V1.0.0 1.0.0.26 V1.0.1 1.0.1.4 V1.0.4 1.0.4.6 V1.1.0 1.1.0.20...
  • Page 7 RealShot Manager Advanced. The software version of the NSR-1000 Series which is supported by RealShot Manager Advanced is written in the release note. After Read the release note, if you need to upgrade to new one, you can get the software from web site.

  • Page 8: １-４ Support Camera Information

    １-４ Support Camera Information Sony Camera Model Name SNC-CM120 SNC-CS3 SNC-CS10 SNC-CS11 SNC-CS20 SNC-CS50 SNC-DF40 SNC-DF50 SNC-DF70 SNC-DF80 SNC-DF85 SNC-DM110 SNC-DM160 SNC-DS10 SNC-DS60 SNC-P1 SNC-P5 SNC-RH124 SNC-RH164 SNC-RS44 SNC-RS46 SNC-RS84 SNC-RS86 SNC-RX530 SNC-RX550 SNC-RX570 SNC-RZ25 SNC-RZ30 SNC-RZ50 Camera Firmware Version v1.02 or higher...
  • Page 9 SNC-Z20 SNT-EP104 SNT-EP154 SNT-EX101 SNT-EX101E SNT-EX104 SNT-EX154 SNT-V704 Axis Camera Model Name Axis 206 Axis 207 Axis 207W Axis 210 Axis 210A Axis 211 Axis 211A Axis 221 Axis 209FD Axis 209FD-R Axis 209MFD Axis 209MFD-R Axis 216FD Axis 216FD-V Axis 216MFD Axis 216MFD-V Axis 225FD...
  • Page 10 Axis 214PTZ Axis 215PTZ Axis 232D+ Axis 233D Axis 241Q Axis 241QA Axis 241S IQinVision Camera Model Name IQeye510 IQeye511 IQeye702 IQeye703 IQeye705 IQeye711 IQeye752 IQeye753 IQeye755 - 6 - v4.40 v4.40 v4.41 v4.48.1 v4.30 v4.30 v4.40 Camera Firmware Version v2.8/6(080313) v2.8/6(080313) v2.8/6(080313)

  • Page 11: ２ Important Notes

    ２ Important notes ・ The cameras and camera servers listed below have some restrictions at V1.04 firmware. SNC-RH series SNC-RS series SNT-EP series SNT-EX series The following are planned to be solved in a future release (V.1.06 or later). ・ Periodical sending of VMF metadata is not executed.(V11N:520, V11R:735) ・...

  • Page 12: ３ Notes

    ３ Notes ３-１ Installation / System Configuration ・ The NSR-1000 Series cannot connect with the client if the setting for ‘Network Interface for Remote Client’ on the ‘Server Configuration’ is configured as ‘Network3’. Please set ‘Network1’ or ‘Network2’. (VT1:2036) ・ If user changes the time zone setting on the ‘Setup Menu’ in the middle of operation such as schedule recording, scheduled recording setting or scheduled action setting change.

  • Page 13: ３-４ Device Registration

    NTSC Resolution CIF(352x240) 2CIF(704x240) 4CIF(704x480) Resolution CIF(352x288) 2CIF(704x288) 4CIF(704x576) ・ User cannot change parameters about recording settings of analog cameras in the ‘Schedule Configuration’. Please change setting in ‘Video’ tab on ‘Device Configuration’. These parameters are used as recording settings for ‘Schedule Configuration’.

  • Page 14: ３-７ Main Window - Play Back Control

    Event/Alarm from the Log Type.(VT1:1897) ・ When the SNT-V704 detects the sensor alarm, the number of channels registered to the NSR-1000 Series are listed in the alarm history at the bottom of the main GUI. (VT1:1707) ３-９ Search Window ・...

  • Page 15: ３-１０ Device Configuration

    MPEG4. (VT1:1866) SNC-RZ25, SNC-P5, SNC-CS10, SNC-CS11, SNC-P1, SNC-DF70, SNC-DF40 ・ When the video format is configured as PAL for the NSR-1000 Series with NSBK-A16 for analog camera, please notice that the frame rate settings are converted to following settings, practically. (VT1:1804)
  • Page 16 internal value not to over the limitation. (V11N:335) ・ Regarding following cameras, if user use the VMD (Camera) with the codec as MPEG4, the frame rate is limited as 20FPS with NTSC or 16FPS with PAL. If VMD (Camera) is disabled after enabled, maximum frame rate setting becomes available after other resolutions are selected once.
  • Page 17 ・ The image size of more than QVGA(320x240) is selected, the maximum frame rate is limited at the transmission side as follows: NTSC: 10 fps or less PAL: 8 fps or less ・ If the cameras mentioned below uses the MPEG4 codec with the image size of more than 384x288, the maximum frame rate is limited at transmission side.
  • Page 18 values different from actual ones when making configurations for the cameras/camera servers shown below (V11R:483) SNC-RH series SNC-RS series SNT-EP series SNT-EX series In this case, perform the adjustment of the detection area size while viewing on the frame in the configuration screen. ・...

  • Page 19: ３-１１ Action Configuration

    registration. (V11N:461) ３-１１ Action Configuration ・ N/A ３-１２ Schedule Configuration ・ If user sets the schedule record of following cameras with the ‘Automatic Record Configuration’, the codec setting shall be not MPEG4 but JPEG. If user needs to change the setting, please select the codec on ‘Video’ tab in the Device menu.

  • Page 20: ３-１３ User Configuration

    between start and stop time of recording is too long or the time displayed on the monitor frame jumps suddenly. Please change the system time after stopping to record. (VT1:1659) ・ ３-１３ User Configuration ・ If user set the username and password except English one byte characters, [-], and [_], user cannot log on with the username and the password.
  • Page 21 (automatically). (V11N:409) In addition, when using AXIS camera with the codec set to MPEG4, connection via Proxy is impossible, because the NSR-1000 series supports only the HTTP Proxy server in connection with the camera. When you want to connect to the camera via Proxy, set the codec to JPEG.

  • Page 22: ３-１８ Other

    the value specified by “Frame rate”. It also depends on combination of image size and frame rate. (V11R:58) Before use, be sure to check whether an image is output at the specified frame rate. If not, reconfigure the image size or frame rate to the other value. It has been confirmed that this issue happens in the following combinations.

  • Page 23: ４ Limitations

    ４ Limitations ４-１ Known Limitations ４-１-１ Installation / System Configuration ・ When enabling the SNMP agent function under [Administration] menu -> [Setup] menu -> [SNMP Menu] ->[Trap], the error message below is displayed and the ERROR lamp is lit. There is no problem in operation, however, because it is displayed when service automatically restarts itself.

  • Page 24: ４-１-４ Main Window - Monitoring

    for continuous recording, it takes more than ten minutes to load the recorded data since [PLAYBACK] is pressed. When you want to select “iSCSI” as recording storage, it is recommended to segment the record by setting a recording schedule that inserts a 1 -second recording break each day in the recurrent schedule of the normal recording.

  • Page 25: ４-１-５ Analog Camera Control

    ・ When recording audio from a camera of which frame rate is set to less than 1fps, you cannot play back audio in synchronization with image. For example, in case of 0.25fps, a four-second image is played back per a frame. On the other hand, with regard to audio, a one-second audio is repeatedly played back four times per a frame.

  • Page 26: ４-１-６ Alarm Notification / Alarm History

    NTSC or PAL and updates the list. (VT1:1251) ・ If analog video data is input to the NSR-1000 Series via NSBK-A16, 0.25fps / 0.33fps / 0.5fps can be selected from the list of frame rate. But these settings are available when codec setting is only MPEG4(I frame).
  • Page 27 selected, actual frame rate is 1fps. (VT1:1842) ・ You can change multiple registration details by selecting two or more cameras at time, if they are all the same model. If 29 or more cameras are selected, however, there are cases where the maximum value cannot be selected from the list.
  • Page 28 (V11N:363,V11N:446) In addition, when making the Device configuration settings continuously, there are infrequent cases where a part of set values etc., is not displayed by screen refresh even after the settings are applied. In this case, select another camera once in the camera tree and then reselect the target camera. (V11R:521) SNC-RH series SNC-RS series...

  • Page 29: ４-１-９ Server Configuration

    set up masks again. (V11R:484) ４-１-９ Server Configuration ・ Pay attention to the followings when you want to change the recording storage from default to other in the storage settings. It affects the estimation of storage capacity. When the storage mode is put into the camera mode (refer to “Configuring Storage for Each camera ([Camera] mode) in the User’s Guide, for details.), audio data is saved in default storage even if changing the recording storage from default.
  • Page 30 Configuration’ at the bottom of ‘Schedule Configuration’ Window and reload the last settings manually. (VT1:1925) ・ The NSR-1000 Series has the following limitation of the number of cameras to be set as alarm recording because of avoiding overload in ‘Automatic Alarm Recording’.

  • Page 31: ４-１-１２ User Configuration

    ４-１-１４ Export ・ In case of playing the media where the recorded images with audio are exported from RealShot Manager Advanced (server/client) or NSR-1000 series, the audio data may not be played back depending on the PC environment. In this case,...

  • Page 32: ４-１-１５ Other

    NSR-1000 Series v1.1.1 Release Note PAL/2CIF(704x288) case: 384x288 ４-１-１５ Other ・ N/A - 28 -...

  • Page 33: ４-２ Resolved Limitations In V1.1.1

    ・ Audio may be interrupted intermittently. ・ RM-NS1000 was not detected correctly when connected to NSR-1000 series. This caused a message “Unsupported Device” to be displayed and ERROR lamp to light. (V11N:479) This issue has been solved.
  • Page 34 This issue has been solved. ・ There was a problem that communication with the slave server was not established after you upgraded the NSR-1000 series or RealShot Manager Advanced which configured the master/slave configurations, from v1.0.4 to v1.1.0. (V11N:473, V11R:582) This issue has been solved.
  • Page 35 ・ There was a problem that live image is not displayed depending on the video codec settings on the SNC-RH series camera. (V11R:745) This issue has been solved. Example of video codec settings that cause the trouble: H.264, 4096kbps, 1fps H.264, 8192kbps, 1fps H.264, 8192kbps, 2fps ・...

  • Page 36: ５ Appendix

    Quick Setup/Start Guide and User’s Guide which come with the product. ５-１-１-３ iSCSI storage support Newly supports the iSCSI RAID as external storage for the NSR-1000 series. For the further information of installation, connection, etc., refer to the technical document which will be separately available and Installation Manual /User’s Guide which...
  • Page 37 User’s Guide. ５-１-１-６ Auto-logon function Newly supports the auto-logon function that allows you to be logged on without being certificated by the NSR-1000 series at start-up. For details, refer to the User’s Guide. ５-１-１-７ ONVIF support Newly supports ONVIF Version 1.01.

  • Page 38: ５-１-２ Additional Features By V1.0.4

    The preparation time for play back in case of having a lot of records is shorter than previous software release. (VT1:1864) Server Audio quality from NSR-1000 Series is enhanced. (VT1:1951) Server Monitoring display at 1920x1200 resolution is enlarged. (VT1:1578) Server/Client How to choose searched records to export is more intuitive. (VT1:1966) Server/Client ‘Resume time on inactivity’...
  • Page 39 NSR-1000 Series v1.1.1 Release Note Server/Client The NSR-1000 Series and the client software start to support controlling PTZ of analog camera via VISCA protocol. (VT1:1911) - 35 -...

  • Page 40: ５-２ Histories Of Resolved Limitations

    ５-２ Histories of resolved limitations ５-２-１ Resolved limitations in V1.1.0 ５-２-１-１ Main Window – Monitoring ・ There are cases where a camera does not move even if you select the preset position which is already configured and appears in the preset list. This problem may happen when you move a camera in the ways other than selecting the preset position after moving it to the present position once on the main screen.
  • Page 41 configured before may disappear on [Camera Action] tab. After the tour settings are updated in the device menu, be sure to reconfigure [Action end preset]. (V11N:54) ・ The problem that occurs when configuring the event/alarm actions If you change target devices for the action on the right side of the screen after some conditions for event/alarm actions are changed in [Schedule] screen, the values for the alarm condition are cleared.

  • Page 42: ５-２-２ Resolved Limitations In V1.0.4

    ５-２-２ Resolved limitations in V1.0.4 ５-２-２-１ Installation / System Configuration ・ When saving the system configuration information in Control Menu, the prohibited characters such as ＃,＄,％ can be used in the file name. However, you should not use those characters, because it is not possible to save it when using them.
  • Page 43 ‘LIVE’ button once. ・ If user clicks ‘LIVE’ button during playing back at 1x1 layout, the NSR-1000 Series cannot make a sound. Please start to monitor live image except 1x1 and change layout to 1x1. ・ The problem that video and audio are momentarily interrupted just when the layout of monitor frame is switched to 1x1 view by double-clicking on the monitor frame.
  • Page 44 window, a space can not be used in the Preset name. (VT1:1960) ・ When VMD(Camera) is configured to SNT-V704, the detection area is created as QVGA size even though the detection area is configured as the full screen of the monitor frame. (VT1:2032) ・...
  • Page 45 ５-２-２-６ Action Configuration ・ When the schedule action is set, the camera preset setting might not be correctly preserved. (VT1:2177) ５-２-２-７ Search Window ・ During the playback for the multiple cameras in the timeline view, the synchronization among the multiple cameras takes time when moving the slide bar.

  • Page 46: ５-２-３ Resolved Limitations In V1.0.1

    ５-２-３ Resolved limitations in V1.0.1 ・ There was a possibility that some recording frames were lost if the NSR-1000 Series with the NSRE-S200 was carried out over long periods with overwriting. (VT1:1585) ・ NSR-1000 Series could not display correct time on the monitor when below time zones were selected.

This manual is also suitable for:

Nsr-1100Nsr-1200Nsr-1050h

Table of Contents