Customising The Sound Of Your Music (Digital Filter Function) (Only For Cdp-Xb930 And Cdp-Xb930E) - Sony CDP-XB630 Operating Instructions Manual

To locate You need to
The next or Turn ≠ AMS ± clockwise until
succeeding tracks
you find the track. When using the
remote, press + repeatedly until
you find the track.
The current or Turn ≠ AMS ± counterclockwise
preceding tracks until you find the track. When using
the remote, press = repeatedly until
you find the track.
A specific track Turn ≠ AMS ± until you find the
directly track number you want. When using
the remote, press the number button of
the track.
By scanning each
Press MUSIC SCAN. When you find
track for 10 seconds the track you want, press · to start
(Music Scan) playing the track.
A point while Press ) (forward) or 0 (backward)
monitoring the sound and hold down until you find the
point.
A point quickly by Press ) (forward) or 0 (backward)
observing the display
and hold down until you find the
during pause point. You will not hear the sound
during the operation.
When you directly locate a track numbered over 10
Press >10 first, then the corresponding number buttons.
To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Note
If "– OVER –" appears in the display, the disc has reached the
end while you were pressing ). Press 0 or turn
≠ AMS ± counterclockwise to go back.
Customising the Sound of Your
Music (Digital Filter Function)
(Only for CDP-XB930 and CDP-
XB930E)
By selecting the type of filter you want, you can adjust
the sound to match your system, your speakers, etc.
This player has four types of filters: "STD (Standard),"
"1," "2" and "3."
FILTER
Sound image
Types of Digital Filter
STD (Standard)
1
2
3
Set the FILTER control to the digital filter type you
want. The display shows the digital filter type you
select.
If you change the type of digital filter during play, the
sound will be interrupted momentarily.
Notes
• The Digital Filter function primarily changes characteristics
outside the audible frequency. They cannot affect changes
within the audible frequency such as those provided by the
tone controls of the amplifier. Therefore, with certain
combinations of hardware and software, there may be no
noticeable effect after switching the filter.
• If you change the type of digital filter during Peak Search
(See page 18), the type of filter appears in the display when
Peak Search is finished.
Playing CDs
Playing CDs
wide ranging
ample spatial representation
clear
smooth sound reproduction
high clarity
strength
warm
deep
GB
11