Mount and Connect
You should have completed this step while preforming the procedure described in
Note
on page
Figure 41: Attach the Slide Rail Locking Bracket to the Side of the Chassis
1
Chassis
3
8-32 x .375-in. countersink Phillips head
screws (3 per side)
Step 4
Attach a cable management bracket to each slide rail locking bracket using the four 8-32 x .375-in. countersink Phillips
head screws provided in the accessory kit.
42.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
2
Slide rail locking bracket
Install the FIPS Opacity Shield
Rack-Mount the Chassis,
49