Advertisement
PREPARATION
Product Handling
■ Do not let the camera get wet. Liquid getting into the camera could cause a short circuit.
■ Wipe the camera gently with a dry cloth to remove any dust or dirt. If the product is very dirty, spray a mild
detergent on the cloth first.
■ If there are any foreign objects on the lens, the image may not be clear. Clean the lens with a soft cloth
before use.
■ Do not clean with thinner, alcohol, benzene, or any other volatile agent.
These may damage the product's surface or affect its operation.
■ Do not disassemble, repair or alter the product. Incorrect disassembly may cause a fire, electric shock, or
injury.
■ Do not shake the camera.
■ Do not pull on the cable.
Installation Instructions
■ Make sure you have enough space for connections when installing the product.
■ Do not install in a dusty, dirty, or moist area.
■ Do not install in direct sunlight or near a heat source.
■ Magnetic objects, such as speakers, may interfere with the camera's operation.
■ Install the product in a place with moderate temperature and humidity. The recommended temperature
range is 0 °C to 40 °C.
■ Strong electromagnetic waves from other devices could interfere with the camera's operation.
■ Remove all the protective plastic bags (vinyl) before use.
* The product and company names contained in this manual may or may not be registered trademarks or
copyrighted, and are only used for identification or explanatory purposes. All trademarks reserved.
* Refer to the model names indicated on the product box for supported TV models.
2
Advertisement
