Erasing Tracks And A Whole Disc Contents (Erase); To Erase A Track - Sony Walkman MZ-NF810CK Operating Instructions Manual

Erasing tracks and a
whole disc contents
(Erase)
You can erase unnecessary tracks or all
tracks in a disc.
Notes
• When you erase groups, see page 57.
• You cannot erase tracks that have been
checked out from your computer. You cannot
erase an entire disc if it contains a checked-out
track. In this case, check in the track or tracks
to the computer.
5-way control key
(., >, ENTER)

To erase a track

Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
1
While playing the track you want to
erase, press MENU.
2
Press . or > repeatedly until
"EDIT" appears in the display, and
then press ENTER.
The recorder plays the selected track
repeatedly.
3
Press . or > repeatedly until
"Erase" appears in the display, and
then press ENTER.
x
MENU
4
Press . or > repeatedly until
" : Erase" appears in the display,
and then press ENTER.
"Erase OK?" and "PushENTER"
appear alternately in the display.
5
Press ENTER.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 47).
To return the preceding
setting
Press x.
To cancel erasing
Press x for 2 seconds or more.
For the remote control operation, see
page 67.
49