Fitting The Furniture Door - Miele FN 35402 i Operating And Installation Instructions

Installation

Fitting the furniture door

If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted cor-
rectly and not under tension.
The next section gives instructions on
how to fit a furniture door that is at
least 16–19 mm thick.
 The distance between the appliance
door and the fixing bracket is set to
8 mm at the factory. Check this dis-
tance and adjust it if necessary.
 Push fitting aids  up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the fur-
niture door being fitted (see  on the
diagram).
76
Tip: Push up the fitting aids  with the
furniture front until they are the same
height as the doors of adjacent kitchen
units.
 Undo the nuts  and take the fixing
bracket  off together with the fitting
aids .