Sharp WH-237DP Service Manual page 12

1. Remove the body in accordance with "REMOVE OF BODY".
2. Push the claws of the guide pin by fl at screwdriver and remove the guide pin from the body.
3. Now the power SW. button is free.
Guide pin
Power SW. button
1. Remove the body in accordance with "REMOVE OF BODY".
2. Remove 2 screws holding the push SW. set to the back cover.
3. Now the push SW. set is free.
Micro SW.
Back cover
REMOVE OF POWER SWITCH BUTTON
Body
REMOVE OF PUSH SWITCH SET
Remove the guide pin
Flat screwdriver
Body
Fig. 22
Fig. 23
12
Push SW. set
Screw