Step
5
6
7
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB
Action
In the Phase Properties pane of the Method Settings phase, click the Start
Protocol button if you wish to include a start protocol.
Result: The Start Protocol dialog opens.
In the Start Protocol dialog:
Select items to display at method start. Result Name and Location is
•
selected by default.
Click OK to confirm and close the dialog.
•
Select the next phase in the Method Outline pane by clicking it, and choose
appropriate parameter values in the Phase Properties pane.
Repeat step 6 until all phases are edited.
If the instrument will not be used for a couple of days or
TIP:
longer, add one or several System CIP phases to the end
of the method as described below.
6 Create a method
6.1 Guide to method creation
6.1.1 Create and edit methods
61