Table of Contents
Advertisement
Connecting video equipment
Connect a VCR, laser disc player, DVD player, or camcorder to the power supply box using a
commercially available audio/video cable as shown below. When you connect the Personal LCD Display
to the video equipment, set the PC-VIDEO switch on the power supply box to "VIDEO."
Note
Do not use audio, audio/video, or S-video connecting cables, which are 9.8 feet (3 m) or longer. The performance
may be reduced.
Set the PC-VIDEO
switch to "VIDEO."
Power supply box
AUDIO / VIDEO
to AUDIO/VIDEO connector
: Signal flow
VCR, laser disc player, DVD player,
camcorder, etc.
Audio/video cable
(special miniplug
phono plug)
to audio/video output
Audio/video cable
(special miniplug
to audio/video outputs
Video (yellow)
Audio L (white)
Audio R (red)
special miniplug)
Camcorder, etc.
continued
13
-US
Advertisement
Table of Contents
