Dvi-Hdtv-Equipped Device - Sony Bravia KLV-40U100M Operating Instructions Manual

DVI-HDTV-Equipped Device

DVI-HDTV-Equipped Device
Notes on Using This Connection
To Do This ...
Watch the device
Label video inputs to easily
identify equipment connected
to the unit
To connect a device with DVI-HDTV connector
If the device does not have an HDMI connector, you can connect the unit's
HDMI IN connector to the device's DVI-HDTV output connector using a
DVI to HDMI adapter or cable.
1
Use a DVI to HDMI adapter or cable to connect the device's DVI-
HDTV output connector to the unit's HDMI IN connector on the rear
panel.
The DVI-HDTV VIDEO connector does not provide audio, so audio
cables must be connected to provide sound when a DVI to HDMI
adapter or cable is used.
Do not connect a PC to the unit's HDMI input. Use the PC IN (RGB)
connector instead when connecting a PC.
2
Use an Audio cable to connect the device's AUDIO output jacks to the
unit's AUDIO input jacks on the rear panel.
Audio cable
DVI to HDMI
adapter or cable
Do This ...
Press V4 on the remote control.
Press INPUT on the top panel repeatedly to select the DVI-HDTV-equipped device
input (Video 4).
See the instructions for setting up Label Video Inputs on page 40.
4
AUDIO IN
R
AUDIO-R (red)
AUDIO-L (white)
or
Connecting the Unit
Rear of unit
IN
L
25