Related Manuals for Sony KV-TG21
Summary of Contents for Sony KV-TG21
- Page 1 Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-TG21 KV-PG14 © 2001 Sony Corporation 4-084-259-12 (1)
-
Page 2: Getting Started
Getting Started SELECT PROGR SELECT Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: Securing The Tv
TV. Securing the TV KV-TG21 only To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 3.8 mm... -
Page 5: Tv Front And Rear Panels
TV front and rear panels TV front panel Button PROGR +/– 2 +/– * SELECT * You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote. TV rear panel SELECT Function Turn off or turn on the TV. -
Page 6: Connecting Optional Components
Connecting optional components Connecting to the video input terminal ( t ) TV front panel TV rear panel Note • Do not connect video equipment to the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal (T) TV rear panel Audio/Video cable... -
Page 7: Troubleshooting
TV. • Count the number of times the 1 (standby) indicator flashes. Press ! The 1 (standby) (main power) to turn off your TV. Contact your nearest Sony service indicator on your TV flashes red several center. -
Page 8: Specifications
Specifications Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43 Channel coverage VHF: E2 to E12 UHF: E21 to E69 CATV: S01 to S03, S1 to S41 8 (Antenna) 75-ohm external terminal... -
Page 9: Remote Control
Remote control JUMP SOUND PROGR MODE FAVORITE Button JUMP PROGR +/– 2 +/– SELECT PIC MODE +/– 0 – 9, ÷ Timer operations SOUND MODE Teletext operations (green label) (red, green, yellow, blue) FAVORITE Function Turn off temporarily or turn on the TV. Display the TV program. -
Page 10: Setting The Timers
Setting the timers You can turn on and off your TV by using the JUMP SOUND PROGR MODE FAVORITE Notes • You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power. • If no buttons or controls are pressed for more than two hours after the TV is turned on using the Wake Up timer, the TV automatically goes into standby mode. -
Page 11: Presetting Channels
Presetting channels You can automatically preset up to 100 TV channels in numerical sequence from program number 1, or manually preset desired channels and channels that cannot be preset automatically. Number buttons JUMP SOUND PROGR MODE + or – FAVORITE PIC MODE SELECT PROGR +/–... - Page 12 Presetting channels (continued) To change the color system setting If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) terminal (1) Press SELECT until “COLOR SYS” appears on the screen. (2) Press + or – to select the appropriate color system until the color is optimal. AUTO To skip program numbers (1) Press PROGR +/–...
-
Page 13: Customizing The Picture
Customizing the picture You can customize the picture by selecting the picture mode or by adjusting its settings. JUMP SOUND PROGR MODE SELECT + or – FAVORITE PIC MODE Notes • “HUE” can be adjusted for the NTSC color system only. •...