Table of Contents
Advertisement
Specifications
Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input current
2.9 A (for 100 to 120 V AC users)
1.3 A (for 220 to 240 V AC users)
Operating temperature
10°C to 30°C (50°F to 86°F)
Operating humidity
20% to 80% (no condensation allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Dimensions
About 412 × 210 × 431 mm (w/h/d)
(16 3/8 × 8 3/8 × 17 inches)
Mass
Approx. 15.5 kg (34 lb 3 oz)
Printing system Thermal printing
Thermal head
2,560 elements, 11.8 dot/mm (300dpi)
Gradations
512 levels
Maximum print size
232.2 × 196.4 mm
Picture elements
2,743 × 2,320 dots (w/h)
Printing time
Approx. 40 seconds
Interface
PARALLEL DATA (IEEE1284) × 1,
(Amphenole 36-pin connector)
Special connector × 1
a) Currently, this connector is not used. It is
reserved for future use.
Accessories supplied
Paper tray (1)
Thermal Head Cleaning Kit (1)
Thermal printing paper UPP-725 (1)
Cleaning sheets (2)
Tray guide cover (1)
AC power cord (1)
Connecting cable (1)
Floppy disk (1)
Before Using this Printer (1)
CD-ROM (1)
b) When you use the printer in the European
countries, use the AC power cord supplied.
When you use the printer in a country
other than the European countries, use the
proper AC power cord for your local
power system.
Accessories supplied separately
Thermal printing paper UPP-725
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water: Ordinary
Design and specifications are subject to change without
notice.
a)
b)
Degree of safety in the presence of
flammable anesthetics or oxygen:
Not suitable for use in the presence
of flammable anesthetics or oxygen
Mode of operation:
Continuous
Specifications
19
Advertisement
Table of Contents
