Cord Removal; Figure 010-6: Cord Reel Retainer On Side; Figure 010-7: Cord Reel, Unwound - Miele S2 Series Technical Information

Technical Information

Figure 010-6: Cord Reel Retainer on Side

7. Disconnect the cord reel from the electronic.
8. Release all wires from their guides.
9. Remove the electronic retainer.
4.4

Cord Removal

Note:
Use only a genuine Miele cord for the correct vacuum model number.
Note:
Never replace the cord end.
1. Remove the cord reel. See Section 010-4.3.
2. Unwind the cord completely. See Figure 010-7.

Figure 010-7: Cord Reel, Unwound

14
S2 Canister Vacuums