Table of Contents
Advertisement
EN 28
5.
TPN10.1E LA
How to Exit SAM
Use one of the following methods:
•
Switch the set to STANDBY by pressing the mains button
on the remote control transmitter or the television set.
•
Via a standard RC-transmitter, key in "00" sequence.
Note: When the TV is switched "off" by a power interrupt while
in SAM, the TV will show up in "normal operation mode" as
soon as the power is supplied again. The error
buffer will not be cleared.
5.2.4
Contents of the Factory mode:
Purpose
•
To perform extended alignments.
Table 5-2 Factory mode overview
Item Item value
0
F/W VERSION
1
Board ID
2
PANEL_ID
3
DB COPY TV to USB
4
DB READ USB to TV
5
CLR_TEMP_R
6
CLR_TEMP_G
7
CLR_TEMP_B
8
AUTO_COLOR
9
ADC_GAIN_R
10
ADC_GAIN_G
11
ADC_GAIN_B
12
ADC_OFFSET_R
13
ADC_OFFSET_G
14
ADC_OFFSET_B
15
VIRGING_MODE
16
E_Fuse
17
ORT_MODE
18
AGEING MODE
19
AUD_LIMITE_MODE
20
AUD_THRESHOLD_BYTE1
21
AUD_THRESHOLD_BYTE2
22
AUD_THRESHOLD_BYTE3
23
AUD_GAIN_LINEIN
24
AUD_GAIN_HDMI
25
AUD_GAIN_ATV
26
AUD_GAIN_DTV
27
AUD_GAIN_USB
28
TUNER_ID
29
CIPLUS QUERY
30
CIPLUS UPDATE
31
CI Key Type Selection
32
AQ_TABLE_INDEX
33
EDID UPDATE
34
LVDS SSC Ratio
35
LVDS SSC Freq
36
DDR SSC Ratio
2013-Oct-18
Service Modes and Fault Finding
Default value
20"
22"
24"
32"
Press OK
715G6092 715G6092 715G6092 715G6079 715G6079 715G6092 715G6092 715G6094 Dispaly the Board ID; be careful changing this, it
17
18
19
6
Press OK
Press OK
68
68
68
128
76
76
76
128
128
128
128
128
Press OK
0
0
0
0
0
0
off
off
off
off
on
off
off
1
100
200
100
0
0
0
0
0
0
10
0
0
Press OK
Press OK
ProductKey
6
6
6
3
Press OK
3%
3%
3%
2%
30KHz
2%
Specifications
•
Displaying and or changing Panel ID information.
•
Displaying and or changing Tuner ID information.
•
Error buffer clearing.
•
Various software alignment settings.
•
Testpattern displaying.
•
Public Broadcasting Service password Reset.
•
etc.
How to Activate the Factory mode
To activate the Factory mode, use the following method:
•
Press the following key sequence on the remote control
transmitter: from the "menu/home" press "1999", directly
followed by the "Back/Return" button. Do not allow the
display to time out between entries while keying the
sequence.
After entering the Factory mode, the following items are
displayed,
39"
40"
42"
8
9
11
128
118
128
128
128
128
128
126
128
off
on
off
10
10
0
3
3
5
2%
2%
2%
back to
div. table
47"
Description
Displays the software versions of the supplier,
Flash PQ, Smart Picture, BL Dimming,
Source Meter, the Picture Quality checksum,
the Dimming library, the Source meter library,
the Flash AQ, the MTK, MCU and OAD software
versions.
can result in not correct displaying the screen!
11
Displays and changes the Panel ID with the left
and right cursor; be careful changing this, it can
result in not correct displaying the screen!
DB COPY TV to USB
DB READ USB to TV
128
Red colour temperature setting
128
Green colour temperature setting
128
Blue colour temperature setting
PC: any pattern that has black and white,
YPbPr: SMPTE bar (colour bar), any timing.
Red ADC gain
Green ADC gain
Blue ADC gain
Red ADC offset
Green ADC offset
Blue ADC offset
off
Use this to return the set to virgin mode.
Depends whether the set has been used
already.
E-fuse mode
ORT mode
Use this for aging a new LCD panel
Three modes,0: off, 1: adaptive mode, 2: fixed
mode
Limit threshold
Limit threshold
Limit threshold
Line-in audio gain
HDMI audio gain
0
Analogue TV audio gain
Digital TV audio gain
USB audio gain
Displays and changes the Tuner ID with the left
and right cursor. Not to be changed when the
tuner is replaced with the correct service part.
Shows the Validity of the CI+ key and the
supplier information
Used to enter a new CI+ code into the NVM. This
can only be used when no CI+ code exists in the
NVM
CI Key Type Selection
5
Audio Quality index
Used to enter a new EDID codes into the NVM
2%
LVDS SSC ratio
LVDS SSC frequency
DDR SSC ratio
Hide quick links:
Advertisement
Table of Contents
