Warning indicators and messages
Self-diagnosis display
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
ss
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.
C:32:
ss
There is trouble with your camera's
•
hardware. Turn the power off and on
again.
C:13:
ss
The camera cannot read or write data on
•
the "Memory Stick Duo". Re-insert the
"Memory Stick Duo" several times.
The internal memory has experienced a
•
format error, or an unformatted
"Memory Stick Duo" is inserted.
Format the internal memory or the
"Memory Stick Duo" (page 53).
The inserted "Memory Stick Duo"
•
cannot be used with your camera, or the
data is damaged. Insert a new "Memory
Stick Duo" (page 97).
E:61:
ss
E:62:
ss
E:91:
ss
A camera malfunction has occurred.
•
Initialize the camera (page 55), then
turn the power on again.
94
) will differ depending on
Messages
If the following messages appear, follow
the instructions.
E
The battery level is low. Charge the
•
battery pack (
t
First"). Depending on the conditions of
use or the type of battery pack, the
indicator may flash even though there
are still 5 to 10 minutes of remaining
battery time left.
For "InfoLITHIUM" battery only
This battery pack is not a
•
"InfoLITHIUM" type.
System error
Turn the power off and then on again
•
(
step 2 in "Read This First").
t
Internal memory error
Turn the power off and then on again
•
(
step 2 in "Read This First").
t
Reinsert the Memory Stick
Insert the "Memory Stick Duo"
•
correctly.
The inserted "Memory Stick Duo"
•
cannot be used in your camera
(page 97).
The "Memory Stick Duo" is damaged.
•
The terminal section of the "Memory
•
Stick Duo" is dirty.
Memory Stick type error
The inserted "Memory Stick Duo"
•
cannot be used in your camera
(page 97).
Format error
Format the media again (pages 52 and
•
53).
step 1 in "Read This