Removing A Jammed Image Plate - GE CRxFlex Operating Manual

Removing a jammed image plate

The user is allowed to open the front cover, e.g. to solve image plate jams at the front side.
When opening the front panel, all motor driven system movements will be stopped (including
the laser.
To remove a jammed image plate, proceed as follows:
1. Simultaneously press the two buttons positioned underneath the feed table.
2. Slide out the front cover.
3. Remove the jammed image plate.
NOTE: Never use force to clear the jammed image plate. If it is not
possible to gently remove the image plate, call your local service
organization.
NOTE: After a jam, the image plate can be used again if not damaged.
4. Close the front cover.
CRxFlex Operating Manual V1.1 35