ABB MicroSCADA Pro SYS 600 Technical Description page 37

MicroSCADA Pro SYS 600 *9.0
1MRS751852-MUM
System Overview
Technical Description
MFL or base system software can be the supporting software in a communication
front-end. MFL is message routing software used for loading DCP-NET software to
DCP cards. It also serves as a communicator between the base systems and NET
software.
COM 510 communication front-end
COM 510 is a DOS based computer, containing 1-4 DCP-NET units and MFL.
Needed hardware is a DCP card from Emulex. COM 510 is connected to a base
system through LAN. The base system is to be found in SYS 500 system server or
in COM 500 communication server. See Figure 4.3.-1.
Com510
Fig. 4.3.-1 An example of COM 510 configuration
COM 530 communication front-end
COM 530 is a Windows NT based computer containing 1-2 DCP-NET units and/or
a PC-NET unit with the base system software dedicated to message routing. See
Figure 4.3.-2.
COM530
Fig. 4.3.-2 An example of COM 530 configuration
37