Sony W55 Handbook page 102

Warning indicators and messages
Enable printer to connect
[USB Connect] is set to [PictBridge],
•
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
The connection is not established.
•
Disconnect and connect the cable for
multi-use terminal (DSC-W55) or the
USB cable (DSC-W35) again. If an
error message is indicated on the
printer, refer to the operating
instructions supplied with the printer.
Connect to PictBridge device
You tried to print images before the
•
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
You tried to execute [DPOF image]
•
without placing a DPOF (Print order)
mark on the image(s).
You tried to execute [All In This
•
Folder] while a folder that holds only
movies was selected. You cannot print
movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
Check the printer.
•
Printer error
Check the printer.
•
Check if the image you want to print is
•
corrupted.
102
The data transmission to the printer may
•
not be completed yet. Do not disconnect
the cable for multi-use terminal (DSC-
W55) or the USB cable (DSC-W35).
Processing
The printer is canceling the current print
•
job. You cannot print until it is finished.
This may take time, depending on the
printer.