CHECKOUT
When installation is complete, check it as follows:
1. Visually inspect the fittings in hydronic applications for
leakage.
2. If necessary, tighten these fittings.
3. Ensure excess capillary is coiled beneath the controller
case.
4. Ensure proper operation by observing the system
through one complete cycle.
IMMERSION WELLS AND COMPRESSION FITTINGS
CROSS REFERENCE
Some series 121371 Wells are also available without the
mounting clamp. These pairs are listed together in Table 1 and
in Table 7for your convenience. The cross reference in Table 8
lists wells and fittings no longer available and suggests
functional replacements.
Table 7. Wells With and Without Mounting Clamp.
121371 Part Number (With
Clamp)
121371A
121371B
121371M
121371N
121371P
121371Q
121371L
13
Part Number
(Less Clamp)
123869A
123870A
123871A
123871B
None
123872A
68-0040—04