Audio Setup - Sony Walkman D-VE7000S Operating Instructions Manual

Setting the Audio Output
Items
n, make DOWNMIX
TV with a
de picture
screen
DIGITAL OUT
de picture
SETUP
nd the
make this
ends on
AUDIO DRC
D-VE7000S.US.2-683-363-11(1)

Options ( : Default settings)
Use this function to create stereo (2-channel) signals from Dolby Digital sources
recorded on DVDs. This setting affects the outputs of the AUDIO jack.
 Select this when the connected audio component supports
Dolby
Dolby Surround (Pro Logic).
Surround
NORMAL Select this when the connected audio component does not
support Dolby Surround (Pro Logic).
You can set the mode of the digital signals output from the OPTICAL OUT jack.

Dolby Digital Select this when connecting an audio
Dolby Digital

DOWNMIX
PCM
DTS DTS

PCM
48kHz/96kHz 
48kHz
PCM
96kHz
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC" (Dynamic Range Control). (Thanks to the dynamic
range compression, the volume of quiet sound is maintained.) Select the level to
your convenience. This setting affects the outputs of the AUDIO jack.
 STANDARD No DRC effects.
WIDE Produces powerful sound. More effective with high quality
RANGE speakers.

( AUDIO SETUP)

component with a built-in Dolby Digital
decoder.
Select this when connecting an audio
component without a built-in Dolby Digital
decoder.
Select this when connecting an audio
component with a built-in DTS decoder.
Select this when connecting an audio
component without a built-in DTS decoder.
Select this when the PCM signal is output at
48 kHz.
Select this when the PCM signal is output at
96 kHz.
Continued 
43