Installation; Location; Climate Range - Miele K 32222 i Operating And Installation Instructions

This appliance must be built in,
otherwise it could tip up.

Fire risk and danger of damage!
This refrigerator must not be installed
underneath a hob.

Location

This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your
refrigerator please bear in mind that it
will use more energy if installed near to
a heater, a cooker or other appliance
that gives off heat. Direct sunlight
should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed
behind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances
behind this appliance.

In environments with high
humidity condensation can build up
on the external appliance panels.
This can lead to corrosion of the
panels.
For prevention, it is advisable to
install the appliance with sufficient
ventilation in a dry and/or air
conditioned room.
Make sure that the appliance door
closes properly, the ventilation gaps
are not covered and the appliance is
installed in accordance with these
installation instructions.

Climate range

The appliance is designed for use within
a certain climate range (ambient
temperatures) and should not be used
outside this range. The climate range of
the appliance is stated on the data plate
inside the appliance.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.

Installation

Ambient room
temperature
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C
51