Advertisement
3) OSD display (about 5 seconds)
4 8 MUTE remote control button
1) Function mute bright line-to-full screen switch.
2) Description Press MUTE button to enter into mute status, press again to
cancel.
Press POWER and VOL
In mute status, mute OSD will be on display if there is no other OSD display
(in "FACTORY" and BUS OFF mode, "FACTORY" and "BUS OPEN"
OSD and MUTE OSD can display on the screen at the same time.
In "B/W BALANCE" mode MUTE button is used to switch between normal
status and a line status. If the "LINE MODE" on menu3 is "1" the full-
screen is switched to a light line and the picture status will automatically
turn to "FACTORY1 mode when the light line is switched to full screen,
the picture status will automatically turn to FACTORY 2 mode. If "LINE
MODE" is "0" the picture status will not change during full screen-to-light
line switch.
3) OSD display (after 5 seconds turns to one line and keeps on displaying)
4 9 WOOF remote control button
1) Function select/cancel woofer mode
2) Description Press WOOF button to control WOOF switch.
VOLUME
buttons can also cancel mute status.
MUTE
07
07
MUTE
Advertisement
