EK280
i
The update archive is not a flexible archive.
9.7.1 Archive content
Pos.
Address
Display
1
01:01F8
GONo
2
08:0A20
ABNo
3
01:0400
Time
4
02:0197
NVers
5
01:0198_1 SigRL
6
01:0198_2 SigRH
7
02:0198_1 SigSL
8
02:0198_2 SigSH
9
08:0811
User
10
08:0812
Reslt
11
08:0A21
Check
The values can be retrieved in accordance with the information in the table via D = display and/or
1
I = interface.
9.7.2 Memory capacity
The archive can store the last 20 updates or update attempts on the device software.
i
The updates archive is not a ring-type memory.
If the archive is full, then the archive must be deleted in order to carry out further updates or to
attempt to do so ( chapter 9.7.3).
9.7.3 Delete updates archive
i
The update archive is also deleted via the function "ClrV" ( chapter
archives
("Clr.V")).
−
So that the updates archive is deleted from the device, open the calibration lock as described in the
EK280 Operating Instructions [1].
−
Move the cursor to
−
Press the ENTER key. ⇒ "0" flashes.
−
Change the value using the arrow keys or to "1".
Application Manual
Global Block number
Archive Block number
Date and time
New firmware version
Firmware signature part 'R', low part
Firmware signature part 'R', high part
Firmware signature part 'S', low part
Firmware signature part 'S', high part
User who started the firmware update
Result entries of the software updates
Check sum result ( „CRC OK" or „Error")
"Serv."
>
"Archives" > "ClrUL".
Description
Retrievable
1
S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
2.4.2 Clear volumes and
207