Specifications - Sony model HTP-78SS Operating Instructions Manual

Sony home audio home theater operating instructions
Hide thumbs Also See for model HTP-78SS:
Table of Contents

Advertisement

Specifications

Amplifier section
1)
Power Output
Stereo mode (rated) 70 W + 70 W
Surround mode (reference)
1)
Measured under the following conditions:
230 V AC, 50 Hz
2)
Reference power output for front, center, surround
speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
Inputs
Analog
Digital
(Coaxial)
Tone
Gain levels
Reproduction frequency range:
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
56
GB
(4 ohms at 1 kHz,
THD 1%)
RMS Output
2)
FRONT
: 143 W/ch
(With SS-MSP1100)
2)
CENTER
: 143 W
(With SS-CNP1100)
2)
SUR
: 143 W/ch
(With SS-SRP1100)
2)
SUBWOOFER
: 285 W
(With SS-WP1100)
Sensitivity: 1 V/50 kohms
Impedance: 75 ohms
±6 dB, 1 dB step
28 – 20,000 Hz
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
AM tuner section
Tuning range
With 9-kHz tuning scale:
Antenna
Intermediate frequency
General
Power requirements 230 V AC, 50/60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT:
Power consumption 110 W
Power consumption (during standby mode)
Dimensions (w/h/d) (Approx.)
Mass (Approx.)
Speaker section
• Front speakers (SS-MSP1100)
• Center speaker (SS-CNP1100)
• Surround speakers (SS-SRP1100)
Front/center speakers
Surround speakers
Speaker units
Enclosure type
Rated Impedance
Dimension (w/h/d) (Approx.)
Front/surround speakers
Center speaker
Mass (Approx.)
Front speaker
Center speaker
Surround speaker 0.4 kg
531 – 1,602 kHz
Loop antenna
450 kHz
5 V, 700 mA
0.3 W
430 × 66.5 × 335 mm
including projecting parts
and controls
3.6 kg
Full range, magnetically
shielded
Full range
57 mm cone type
Bass reflex
2.7 ohms
80 × 150 × 88 mm
250 × 85 × 88 mm
0.5 kg
0.7 kg

Advertisement

Table of Contents
loading

Table of Contents