Miele HR 1124 Installation Instructions Manual page 20

Notes on installation
Mounting the RBGAG All Gas
Backguard
The rear of the range must be
accessible.
Mount the backguard before installing
the anti-tip device and connecting of
the range.
 Loosen the screws of the island trim.
 Pull back the island trim slightly until
it can be removed.
2
a Extender
b Air ducts
 Insert one extender  onto each of
the left and right air ducts .
 Screw the extenders into place with
2 screws each.
20
1
2
1 2
a Backguard
b Rear panel backguard
c Interior panel
 To avoid scratching the backguard
, place it front side downwards on a
soft surface (e.g., a blanket). The
lower edge should line up with the
edge of the table so that the
backguard is lying flat.
 Remove the screws from the rear of
the backguard.
 Remove the rear  and interior 
panels.
3