Setting Up The Vcr Plus+ ® System - Sony RDR-VX500 Operating Instructions (RDRVX500) Operating Instructions Manual

13
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select "On." Otherwise, select "Off."
14
Press ENTER when "Finish" appears.
Easy Setup is finished. All connections and
setup operations are complete.
Easy Setup
Easy Setup is finished.
To return to the previous display
Press O RETURN.
z Hint
If you want to run Easy Setup again, select "Easy Setup"
in the "Setup" display (page 107).
Note
To record TV programs using the timer, you must set the
clock accurately.
32
10:10 AM
Finish
Setting Up the VCR Plus+
System
Setting up your recorder involves coordinating the
TV channel number (the number you turn to on
your TV or recorder to watch a program) with the
guide channel (the number that's assigned to that
channel in your TV program guide).
To find the guide channel numbers, look at the
"Channel Line-up Chart" in the program guide for
your area that features VCR PlusCode numbers.
Use the Channel Line-up Chart to coordinate the
guide channel number with the TV channel
number. For example, if HBO is listed in the
Channel Line-up Chart as channel 33, and the
recorder receives HBO on channel 5, coordinate
these numbers using the following procedure.
SYSTEM
MENU
O RETURN
1
Press SYSTEM MENU while the recorder is
stopped.
Title List(Original)
Title List
Press ENTER :
Timer
Title Menu for DVD Title List.
Edit
Disc Setting
Setup
®
M/m/</,,
ENTER
10:10 AM