Interval Photo Recording
You can carry out a time-lapse recording by setting the camcorder to automatically
record still images.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select INT. R -STL in
(4) Select SET, then press EXEC.
(5) Select INTERVAL, then press EXEC.
(6) Select a desired interval time, then press EXEC.
(7) Press
(8) Set INT. R -STL to ON, then press EXEC.
(9) Press EXIT to return to FN.
The INTERVAL MEM STILL indicator flashes on the screen.
(10) Press PHOTO deeply.
Interval Photo Recording starts.
The INTERVAL MEM STILL indicator lights up on the screen during Interval
Photo Recording.
4
MEM SET 2
INT. R -STL
INTERVAL
1MIN
EXEC
To cancel Interval Photo Recording
Set INT. R -STL to OFF in the menu settings.
Note
Interval Photo Recording is canceled if you press IMAGE TRANS during Interval Photo
Recording.
Example
[a]
[b]
[a] Memory Photo recording
[b] INTERVAL 10min
, then press EXEC (p. 177).
RET.
5
EXIT
MEM SET 2
INT. R -STL
INTERVAL
1MIN
5MIN
10MIN
RET.
EXEC
[a]
[a]
[b]
.
EXIT
RET.
PHOTO
119