20. Installing the Shock Mount Adaptor
20-2. Installation Procedure for Shock Mount Adaptor
1
Use the supplied hexagonal socket head bolts (M8), spring washers (ø8), and L wrench (for M8) to
secure the shock mount adaptor to the unit installation location.
c
When securing, orient so that the notches of the shock mount adaptor face the inner side.
Reference: Installation hole dimensions and pitch
2
Remove the legs from the bottom of unit.
20-2
(E)
493.6 mm
80
Recording unit
* In case of the measuring unit,
M8
Shock mount adaptor ø9 hole
the removal procedure is the same.
SIR-3400H / SIR-3032i / SIR-3032W