Getting Started; Installing The Tv; Preventing The Tv From Toppling Over; Bundling The Connecting Cables - Sony KDL-26M3000, KDL-26ML130, KDL-32M3000, KDL-32ML130, KDL-37M3000 Operating Instructions Manual

Getting Started

1. Installing the TV

~
• The Table-Top Stand for this product is packaged separately (for models KDL-26M3000/KDL-26ML130/
KDL-37M3000). To install the TV unit to the Table-Top Stand before the connection and setup, refer to the
Table-Top Stand instructions (supplied with the TV set).

Preventing the TV from Toppling Over

TV
stand
1
Screw the support belt (supplied) to the TV
stand (not supplied) with a wood screw
(supplied).
2
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial screws
1 3
/ to / inch (3 to 4 mm) diameter to fit to the TV
8 16
stand. Consult your dealer about the types of screw(s).
Table-Top
Stand
2
3
1

Bundling the Connecting Cables

You can bundle the connecting cables as illustrated
below.
1
2
~
• Do not bundle the AC power cord with other connecting
cables.
11