Sony NSX-24GT1 Reference Guide (PDF) Quick Setup Manual

Internet TV

Quick Setup Guide

PLEASE READ END USER LICENSE
AGREEMENT BEFORE USING
THIS PRODUCT
Printed in U.S.A.
© 2010 Sony Corporation
4-197-994-13 (1)
Not the actual ratio
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
Connection
Preparation
In the Box step Connect to a network
Internet TV (1)
When using wired connection, connect the TV and a router with
a LAN cable. When using wireless connection, you need to set
Keypad (1)
the Network Setup in the Initial Setup Wizard (on step 6).
Size AA batteries (2)
IR Blaster cable (1)
AC power cord (1)
(except NSX-24GT1)
Internet TV
Table-Top Stand (1)
Cable cover (1)
Screws (M4 x 10) (3)
(for NSX-24GT1)
Screws (M5 x 16) (3)
(for NSX-32/40/46GT1)
Quick Setup Guide (1) LAN cable or Wireless LAN
Reference Guide (1)
Warranty card (1)
End User License
Agreement (1)
Router
Inserting batteries
AA-size (R6)
Note
If your connection method differs from that shown above, see "Help Guide" (http://esupport.sony.com/internettv/helpguide/). For details on "Help Guide," see the back side.
step Connect the Cable/Satellite Box
Use one of the connection cables illustrated below. Then, place the IR Blaster near the
remote sensor of the Cable/Satellite Box.
Internet TV
Place the IR Blaster so that the infrared
transmitter points to the remote sensor of
HDMI cable, IR Blaster the Cable/Satellite Box. For details on the
Component video/ cable IR Blaster, see "Help Guide" on the back
side.
audio cable or
Video/audio cable
Router Cable/Satellite Box
When connecting the Cable/Satellite Box with an HDMI cable, you can use any HDMI jack on the TV.

For details of network connection with the Cable/Satellite Box,

see the operating instructions supplied with the Cable/Satellite Box.
You can control a Cable/Satellite Box via the Home Network depending on your Cable/Satellite TV provider.

For details, see "Help Guide" on the back side.
step Connect other devices
Connect the AV Receiver and other devices to the TV if necessary.
Internet TV
IR Blaster IR Blaster cable
cable
Router Cable/Satellite Box
Optical digital
cable
HDMI cable,
Component video/
audio cable or
AV Receiver
Video/audio cable
Other Devices
Blu-ray Disc player/DVD player/Game etc.
step Connect to the power source
Plug the TV into the wall outlet.
Refer to the Table-Top Stand leaflet (supplied) for directions on how to

attach the AC power cord (except NSX-24GT1) and the cable cover.
step Press the (on/standby) button
step Start Internet TV setup
Follow the directions of the Initial Setup Wizard displayed on the screen.
When you skip the Network Setup, only limited functions will be

available with the TV.
The screen may stay dark for several seconds after the Sony logo

disappears. Wait for a while until the Initial Setup Wizard is displayed.
It takes about 15 minutes to complete the Initial Setup.

* This illustration may differ from the actual display.