Specifications - Sony PFM-42B2 (English: pg.54-101 Brochure & Specs

SPECIFICATIONS

Picture Performance
Panel Resolution
Pixel pitch
Active area (W/H)
Viewable picture area
Colors
Type
Color system
Sampling rate
Input/Output
INPUT1
RGB
YUV
AUDIO
INPUT2
RGB
YUV
AUDIO
VIDEO* 1 COMPOSITE IN
Y/C IN
AUDIO IN
COMPOSITE OUT
AUDIO OUT
REMOTE (RS-232C)
General
Power requirements
Power consumption
Operating temperature
Storage temperature
Humidity
Dimensions* 2 (W/H/D)
Mass
Supplied Accessories
Regulation Compliance
Dimensions
PFM
50
44.5
1,246 (49)
Control Panel
MENU ENTER VOLUME
The control panel is located on
PFM PFM
50 42V1
the top of the unit.
Distributed by
MK10071V1OHB03SEP
Printed in Japan on recycled paper
PFM50C1/50C1E
1365 x 768 pixels
0.81 x 0.81 mm
1,106 x 622 mm
50-inch/1,270 mm (measured diagonally)
16.8 million colors simultaneously
AC-type Plasma Display Panel with anti-reflection screen
NTSC, PAL, SECAM, NTSC4.43, PAL60, PAL-M,
PAL-N
13.5 to 140 MHz
D-sub 15-pin
0.7 Vp-p/non composite, 1.0 Vp-p composite, 75 Ω
0.7 Vp-p/non composite (U/V), 1.0 Vp-p/composite (Y), 75 Ω
Stereo mini jack, 500 mVrms, high impedance
D-sub 15-pin
0.7 Vp-p/non composite, 1.0 Vp-p composite, 75 Ω
0.7 Vp-p/non composite (U/V), 1.0 Vp-p/composite (Y), 75 Ω
Stereo mini jack, 500 mVrms, high impedance
BNC, 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic termination
Mini DIN 4-pin
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic termination
C: 0.286 Vp-p ±2 dB sync negative (NTSC), 75 Ω
0.3 Vp-p ±2 dB sync negative (PAL), 75 Ω
Stereo mini jack, 500 mVrms, high impedance
BNC, loop-through
Stereo mini jack, 500 mVrms, high impedance
D-sub 9-pin
AC 100 to 240 V, 50/60 Hz, 5.4 to 2.2 A
490 W
0 to 35 °C (32 to 95 °F)
-10 to 40 °C (14 to 104 °F)
20 to 90 %, no condensation
1,246 x 755 x 100 mm
(49 x 29 6/8 x 4 inches)
46.7 kg (103 lb 9 oz)
AC Power Cord, AC Plug Holder (2), AA/R6 size Battery (2), Cable Holder A (2), Cable Holder B (4),
Operating Instructions
Remote Commander RM-971
UL1950, CSA No.950 (c-UL), CE LVD (EN60950), FCC Class B, IC Class B, VCCI Class B,
CE EMC (EN55022 Class-B, EN55024, EN61000-3-2, EN61000-3-3), C-Tick (AS/NZS 3548/95, AS/NZS 4252.1), CCIB, JEIDA, CB, KTL, MIC
*1 The PFM-42B2E and PFM-50C1E require an optional BKM-B10 adapter to accept video signals.
The PFM-42V1E requires an optional BKM-V10 adapter to accept video signals.
*2 Excluding protruding parts.
PFM
42B2
35.5
44.5 11.5
100 (4)
PFM
42B2
The control panel is located on the rear of the unit.
Note: The power switch is positioned on the front of the display.
PFM42B2/42B2E
1024 x 1024 pixels
0.90 x 0.51 mm
921 x 522 mm
42-inch/1,058 mm (measured diagonally)
NTSC, PAL, SECAM, NTSC4.43, PAL60, PAL-M
AC 100 to 240 V, 50/60 Hz, 4.2 to 1.5 A
360 W
1,033 x 631 x 83 mm
(40 3/4 x 24 7/8 x 3 3/8 inches)
28.4 kg (62 lb 9 oz)
Remote Commander RM-42B
35.5 11.5
1,033 (40 3/4)
83 (3 3/8)
©2003 Sony Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony is a registered trademark of Sony Corporation.
All other trademarks are the property of their respective owners.
PFM42V1/42V1E/42V1P/42V1A
852 x 480 pixels
1.08 x 1.08 mm
920 x 518 mm
NTSC, PAL, SECAM, NTSC4.43, PAL60,
PAL-M, PAL-N
DVI
–
–
Phono jack (L/R), 500 mVrms, high impedance
AC 100 to 240 V, 50/60 Hz, 3.7 to 1.5 A
360 W
27.0 kg (59 lb 8 oz)
DVI-D Cable, AC Power Cord,
AC Plug Holder (2), AA/R6 size Battery (2),
Cable Holder (4), Operating Instructions
Remote Commander RM-971
PFM
42V1
35.5 35.5
1,033 (40 3/4)
Unit: mm (inches)
21.6
83 (3 3/8)