Table of Contents
Advertisement
before using the water dispenser
Before using the water dispenser, clean the water tank first.
1. Take out the water tank by gripping it tightly on both sides,
then keep pulling it upward with some force until removed.
2. Take off the water tank cover, and wash the water tank, valve
and its cover. After washing, drain the water from inside the
tank and replace the cover.
3. Insert the water tank valve into the water dispenser hole first.
Be careful not to press on the tank valve.
4. Fit the water tank along the guides on the door. Press down on both sides of the water tank.
5. When a click is heard, that means the installation is completed.
Tank valve
Dispenser hole
filling the water tank
You can fill drinking water into the water tank through
either opening the small lid or the large lid. Close the
lid after filling.
•
Do not fill above the level, otherwise, it may
overflow.
•
Before filling with water, ensure that the water
tank is steady and in a correct position.
•
Apart from drinking water, other beverages
(such as milk, juice, carbonated beverage,
etc) are not suggested to be used, especially
beverages that include grain must not be used
(may result in blockage and damage).
•
Hot water must not be filled into the water
tank directly.
•
Do not touch other parts of the unit when
filling water, it may lead to leakage.
uide
Small lid
Large lid
11
Hide quick links:
Advertisement
Table of Contents
