3
Press MENU, select [Matching], and press ENTER.
The GPS unit starts scanning the images that can be matched with positioning
information. When there are many images, it will take longer time for scanning.
Number of matched images
To stop scanning, press ENTER.
•
4
Select [Start] and press ENTER.
The GPS unit starts the matching operation. When completed, [Complete]
appears.
Number of images to be matched*
Number of images being matched
You can match a maximum of 60 images in one session. When there are more than 60 images
*
that can be matched on the GPS unit, 60 is displayed.
Note
Be sure that you do not perform the following during a matching operation. The image data
may be damaged. If you want to do one of the following operations, stop the current matching
operation.
open the battery cover
•
turn off the GPS unit
•
disconnect the USB cable
•
5
Remove the "Memory Stick Duo" media/SD memory card.
Tip
The more images there are, the more time it takes for matching. It is recommended that you match
images and data frequently.
24
Total number of images
that can be matched.
Battery power remaining