Identifying Parts And Controls - Sony Vaio LocationFree LF-V30 Operating Instructions Manual

Identifying Parts and Controls

Front
WIRELESS
NETWORK
NET AV
SETUP
MODE
RESET
1 POWER button/LED (1 page 12)
Turns the Base Station power on and off.
Green: The power is on.
Red: Attempting to be turned off.
Red blinking: A malfunction has occurred.
Off: The power is off.
2 WIRELESS LED
Indicates the wireless function status.
Amber: Wireless network is available on the 5 GHz channel
(Access Point (AP) mode).
Green: Wireless network is available on the 2.4 GHz channel.
Green blinking: Attempting to connect (Client mode).
3 NETWORK LED
Indicates the connection status to a network.
Green blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when
data is streamed.
Off: Not connected (Access Point mode).
4 NET AV LED
Indicates the connection status with the LocationFree
devices.
Green: Connected to the Base Station.
Amber: Automatic NetAV check has failed.
Off: Not connected.
Red: The Base Station is being initialized.
5 SETUP MODE button and LED (1 page 19)
Press to register LocationFree
Indicates the SETUP MODE status.
Amber blinking: The Base Station is in the Setup mode.
6 RESET button (1 page 34)
Initializes all settings on the Base Station to the factory defaults.
7 Remote sensor for learning and searching remote features
(1 page 20)
When using the learning or searching remote features or setting the
on-screen remote control, this sensor receives signals from the
remote of video devices.
7
®
client
®
client devices.