Usb Device - Sony 4-178-247-13(2) Operating Instructions Manual

Symptom
The Control for HDMI function
does not work.
No sound is output from the
system and TV while using the
System Audio Control function.
Bonus contents or other data that
are contained in a BD-ROM
cannot be played.
The unit does not work and
"CHILD LOCK" appears in the
front panel display when you
press any button on the unit.
The system menu does not work. • Press HOME on the remote.

USB device

Symptom
The USB device is not
recognized.
Problems and solutions
• Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
(page 56).
• Make sure that the connected component is compatible with the [Control for
HDMI] function.
• Check the connected component's setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set [Control for HDMI] in [HDMI
Settings] of [System Settings] to [Off], then set [Control for HDMI] to [On]
(page 56).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 46).
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 46).
• Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
reconnect the USB device (page 30). 4 Turn the system on. 5 Insert the BD-
ROM with BONUSVIEW/BD-LIVE.
• Set the child lock function to off (page 51).
Problems and solutions
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB
device. 3 Turn the system on.
• Make sure that the USB device is securely connected to the
• Check if the USB device or a cable is damaged.
• Check if the USB device is on.
• If the USB device is connected via a USB hub, disconnect it and connect the
USB device directly to the unit.
(USB) port.
65
GB